GPS WiFi Positioning Asset GPS Tracker Inventory Tracking Device With Sim
Description
MT07 is a 2G asset GPS tracker with 2700Mah battery, compact size, and built-in GPS/GSM antenna, low cost, low data consumption. It’s ideally suitable for Asset tracking market.
1 Position and Monitor
The default setting is the terminal would send one packet each 24 hours, the packet information includes: Position status, longitude and latitude, GSM Signal Strength, GPS numbers, battery voltage etc, the upload interval can be configured
2 AGPS
The terminal is with APGS function, when the terminal connects GPRS, AGPS can be used to speed the position speed and improve the position accuracy
3 LBS
The default position mode is by GPS, when GPS enters into the blind zone and cannot position accurately, the terminal will switch to LBS, LBS provides the reference location which is not very accurate
4 WIFI Position
The terminal is with built in WIFI Chip, when it starts, the WIFI Chip will automatically connects to the WIFI hotspot nearby and filter the hotspot info then select the WIFI hotspots with strongest signal, the terminal will pack those hotspots info and saved into the pack that will be uploaded, after the backend receives information from the terminal, it will interpret the WIFI info and acquire the current location info according to the WIFI position server.
The default setting is WIFI priority, once it detects WIFI Hotspot, it will upload WIFI info only , and do not use GPS, if WIFI is not detected, it will use GPS to position
5 Intelligent Tracking Function
When found the vehicle is stolen or in other emergency cases and the real time location of the vehicle needs to be checked, a SMS can be sent or send a command from the backend, when the terminal starts work next time, it will receive this command and enter into track mode, and upload the location data according to the preconfigured interval by customer until a stop tracking command is received
6 Blind Zone Compensation
When the terminal enter into blind zone when in sleep mode,it will store the trace data according to the preconfigured time interval and it will upload the data in the blind zone to the backend
Remark: MT07/MT07C upload 16-32 pack blind zone compensation data, MT07W/MT07CW uploads 8-16 pack blind zone compensation data.
7 Clock Mode
The terminal could verify the timely wake up time points, maximum 4 points can be set for more accurate position and connection to the server, this function could use SMS command or backend command to set
8 Backend Specific Commands
Since the working time of the terminal is short, it is rare to receive the SMS, to ensure the command sending efficiently, the backend uses a specific commands for MT06CW which can preset the command, when the terminal is online, the backend will automatic send this command, to make sure the commands is properly received.
9 Battery Level Detect
The terminal will upload the battery level status together with the location data pack, and display the battery level on the backend so the user could well know the balance battery, and meanwhile display the current transmission time and the balance battery level of the next uploading pack, so the user could have clear view on the terminal status
10 Light Sensor Detect
At Bottom of MT07/MT07W is built in with high sensitive light sensor, when the terminal is tampered, the terminal will be activated even in sleep mode and enter into tamper alarm working mode, and upload the alarm function to the backend
Specification
| Physical | Dimension | 64.5mm*41.5mm*25.5mm(L*W*H) |
| Weight | 78±5g |
| Cellular | Communication module | Quectel MC25 |
| Frequency | Working frequency: GPRS: 850/900/1800/1900MHz Sensitivity: -107dBm@850/900MHz -106dBm@1800/1900MHz Output power: Class 4 (2W)@850/900MHz Class 1 (1W)@1800/1900MHz GPRS data: GPRS Class 10, Mobile Station Class B |
| GPS | Channels: 50 Sensitivity: -147dBm Position accuracy:5-10m Accuracy: 5m CEP Cold start: <27s Hot start: <1s |
| Power | Battery | Disposable Lithium-ion battery and (3.6V,2700mAh) and ultra-low discharge rate:less than 1%, store one year below 25℃ |
| Power consumption | Average working current <100mA; Power save current <15uA; |
| GSM antenna | Internal High Gain |
| GPS antenna | Internal High Gain |
| SIM | Microsim |
| Indicator | 2 status LEDs, Green: GPS, Red: GPRS |
| Environmental Parameter | Working Temperature | -20℃~ +70℃ |
| Humidity | 5%~95% (no fog) |
| Ingress Protection Rating | IP65 |
FAQ
Q: Reply Time:
A: All inquiries will be answered within 24 hours.
Q: Payment Terms:
A: We accept payment by Visa Card, Master card, Alipay, Qiwi Wallet, Western Union and Bank Transfer T/T.
Q:Shipment Terms:
A: All orders can be shipped out within 1-3 working days normally. Once the order is shipped out, we will
send an email to you include the track number and the package photos.
Q:Customize and Sample:
A:OEM & ODM services are accepted if you place an order with enough quantity, and sample first is highly welcome.
Q: MOQ Limitation:
A: No MOQ limit, 1 pc for sample checking is available.
Product Tags:
|
|
WiFi Positioning 2G Asset Inventory Beehive GPS Tracker With Sim Card Images
|
